SAMdisk 3.8.10

 Amstrad CPC, Utility  No Responses »
May 232017
 

SAMdisk is a tool to convert floppy disks into various disk images which can be used in emulators. It works with almost all PC floppy controllers and supports also some copy-protected formats. It requires that you have fdrawcmd.sys, a low-level floppy disk driver, installed on your system.

You can download the latest version from the SAMdisk website.

Version 3.8.10 (2017-05-14)

  • added read and write support .qdos (QL) disk images
  • added –irregular option for blind output image if first track isn’t regular
  • added –fill to set filler byte for regular formats
  • fixed setting perpendicular mode for 1Mbps data rate
  • fixed reading directly to single-sided formats from a:/b:
  • fixed short data indicator showing on no-data sectors
  • fixed raw output not using source format fill byte for missing sectors
  • changed raw output to allow blank head 1 to mirror head 0 format

Related posts:

  1. SAMdisk v3.1
  2. SAMDisk v3.3
  3. SAMDisk v3.4
  4. SAMDisk v3.7
  5. SAMDisk 3.8.9

SAMDisk 3.8.9

 Amstrad CPC, Utility  No Responses »
Dec 312016
 

SAMdisk is a tool to convert floppy disks into various disk images which can be used in emulators. It works with almost all PC floppy controllers and supports also some copy-protected formats. It requires that you have fdrawcmd.sys, a low-level floppy disk driver, installed on your system.

You can download the latest version from the SAMdisk website.

Version 3.8.9 (2016-12-18):

  • fixed clipping extent of non-error sectors
  • fixed raw .2d file reading (thanks Tatsuyuki Sato)
  • fixed HD track error during 2DD to 2HD promotion (thanks Tatsuyuki Sato)
  • fixed use of scanning data rates not supported by FDC
  • fixed –offsets crash if 2 stored copies were present
  • changed gap indicator from g to +, added – for short sectors
  • added support for double-density MB-02+ disks (thanks Jan Kucera)
  • added –step-rate speed option (0=slow, 15=fast, 10=default)

Related posts:

  1. SAMdisk v3.1
  2. SAMDisk v3.3
  3. SAMDisk v3.7
  4. SAMDisk v3.8 / v3.8.1
  5. SAMdisk 3.8.10

SAMDisk v3.8 / v3.8.1

 Amstrad CPC, Utility  No Responses »
Mar 162014
 

SAMdisk is a tool to convert floppy disks into various disk images which can be used in emulators. It works with almost all PC floppy controllers and supports also some copy-protected formats. It requires that you have fdrawcmd.sys, a low-level floppy disk driver, installed on your system.

You can download the latest version from the SAMdisk website.

Changes Version 3.8.1 (2014-03-11):

  • Fixed data extent bug reading from stream images (SCP/RAW/DFI)
  • SBT images now auto-execute under SAM DOS, even if not natively bootable

Changes Version 3.8 (2014-03-09):

  • Added support for SuperCard Pro .scp flux disk images (MFM+FM)
  • Added –pll option to control PLL method with flux image scanning
  • Fixed –head giving ambiguous option error due to typo
  • Fixed KBI-19 format slightly overhanging track wrap
  • Improved EOT handling of flux images containing just one revolution
  • Changed –slow-step to –old-drive to better match usage

Related posts:

  1. SAMdisk 3.8.10
  2. SAMdisk v3.1
  3. SAMDisk v3.3
  4. SAMDisk v3.4
  5. SAMDisk v3.7

SAMDisk v3.7

 Amstrad CPC, Utility  No Responses »
Jul 062013
 

SAMdisk is a tool to convert floppy disks into various disk images which can be used in emulators. It works with almost all PC floppy controllers and supports also some copy-protected formats. It requires that you have fdrawcmd.sys, a low-level floppy disk driver, installed on your system.

You can download the latest version from the SAMdisk website.

Changes:

  • Added support for KryoFlux and DiscFerret stream images (MFM+FM)
  • Added preliminary support for D4M (FD-4000) disk images
  • Added hex output with –hex or -x, with limited hex using –hex-ish
  • Added –no-gap4b to ignore gap data after the final sector
  • Added –abs-offsets to show absolute rather than relative sector offsets
  • Fixed ‘extra byte’ EDSK extension being used unnecessarily on CRC errors
  • Fixed crash during CPC weak sector sniffing due to no-data 4th sector
  • Fixed regular image reading reporting transient disk errors
  • Improved support for ED images, including 2.88M raw images
  • Improved gap reading support for IPF images
  • Changed raw track parsing to ignore headers with ID CRC errors
  • Changed raw image writing to use only first cyl to determine format
  • Relaxed D2M sniffing by removing system partition type (0xff) check
  • Reduced gap sync requirement to remove more unwanted gaps

Related posts:

  1. SAMdisk v3.1
  2. SAMDisk v3.3
  3. SAMDisk v3.4
  4. SAMDisk 3.8.9
  5. SAMdisk 3.8.10

DSKgen v1.0.0.0

 Amstrad CPC, Development, Utility  No Responses »
Apr 272013
 

Augusto Ruiz created a command line program, which you can use to create RAW data DSK files. Those disks are normally intended to be read directly with the FDC and is a good choice if you want to do cross-development for the Amstrad CPC.
It is written in .NET, so you need at least .NET 2.0… or Mono – so you can use the program under Linux, too. You can download it from the tools website or at the end of this news..

DSKgen v1.0.0.0
DSKgen v1.0.0.0
DSKGen.1.0.0.0.7z
Version: v1.0.0.0
8.3 KiB
1289 Downloads
Details

Related posts:

  1. CPCXfs and 2CDT for Windows and Linux
  2. CPC Basic 3 cross-compiler
  3. AMSprite
  4. SDCC2Pasmo v1.5 sources
  5. CPC-SDK project
 Older Entries

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close